#BOOM SPEAKER CHARGER MANUAL#
#BOOM SPEAKER CHARGER FULL#
#BOOM SPEAKER CHARGER BLUETOOTH#

If G-BOOM3 is connected to a LINE IN source, Bluetooth will not function.

G-BOOM3 can only play audio from one source at a time.For best audio performance, turn the volume on your Bluetooth source device all the way up.The blue LED ring will change from flashing to solid, indicating that your Bluetooth device is reconnected to G-BOOM3.Select “G-BOOM3” from the list on your Bluetooth device.Make sure that G-BOOM3 is powered on and within range.Once your Bluetooth device has been paired with G-BOOM3, it is simple to reconnect them. The unit will return to pairing mode and the blue LED ring will flash.Press and hold the Bluetooth PAIR button for 3 seconds to disconnect the current Bluetooth connection.The blue LED ring will change from flashing to solid, indicating that your Bluetooth device is connected to G-BOOM3.Search for Bluetooth devices and select “G-BOOM3”.Turn on your compatible A2DP Bluetooth device and enable Bluetooth.The LED ring will flash blue and Bluetooth icon will light up on the LCD display. The speaker will be entered to Bluetooth mode.Press the POWER ON/OFF button to turn on G-BOOM3.You can stream audio wirelessly to G-BOOM3 from up to 33’ away using your iPhone, iPad, iPod, Android, laptop, or other A2DP Bluetooth enabled device. NOTES: Saving a new station preset in the same position as a previously saved station will replace the previously stored station for that preset number. To recall a preset station, repeatedly press the PLAY / RADIO PRESET button until the desired preset number appears in the display and the station tunes in.Repeat these steps for up to 10 presets, as desired.Press the TUNE UP or TUNE DOWN button to select a preset number (01- 10).Press the PLAY / RADIO PRESET button again to confirm the setting and the station will be saved into memory.“P” will appear and “#” (the preset number) will blink on the LCD display. Press and hold the PLAY / RADIO PRESET button to create a preset for the current station.To preset a radio station to memory, first follow the previous steps to tune in the desired station.Do not place G-BOOM3 near the AC power adapter as this may lead to reception interference. Keep digital music players or mobile phones away from G-BOOM3 as this may cause interference. For best reception please place the unit close to a window or open area to improve reception quality. NOTES: G-BOOM3 features a built-in internal FM antenna. Repeat this process until the desired station appears on the LCD display. The tuner will search and stop on the next strongest station signal it finds. For auto tuning, press and hold the TUNE-UP or TUNE DOWN button until the display starts to scan, then release the button.

#BOOM SPEAKER CHARGER MANUAL#

For manual tuning, repeatedly press the TUNE-UP or TUNE DOWN button to manually adjust the tuning on the LCD display until the desired station appears.The current FM station and FM icon will appear on the display. With G-BOOM3 powered “ON”, press the FM RADIO button.NOTE: If inserting audio cable into the Line-In Jack, G-BOOM3 will change to Line-In mode automatically regardless of the current input source. To switch to Radio, press the FM Radio button once and G-BOOM3 will enter FM Radio mode. When the G-BOOM3 powers “ON”, the default audio input source is Bluetooth. The LED ring will flash 1, 2 or 3 times when the EQ button is pressed to indicate preset EQ1, EQ2 or EQ3 respectively. Press the EQ Button repeatedly to cycle through them.

#BOOM SPEAKER CHARGER FULL#

Charge the rechargeable battery at least biannuallyĮQ1 = (Default) Dynamic: full bass and crisp high frequencies.ĮQ2 = Deep: Added emphasis on bass and low mids frequencies.ĮQ3 = Bright: Added emphasis on mids, vocals and high frequencies.

Rechargeable batteries have a limited number of charge cycles.

Actual battery life varies with use, settings, and environmental conditions.

The battery is internal and cannot be replaced.

When the G-BOOM3 battery is low, the red LED Charging indicator will begin flashing to warn you to recharge your G-BOOM3 for continued use and enjoyment. The red LED charging light on G-BOOM3 will illuminate to indicate charging process and turn off when the battery is fully charged. Use only the supplied AC adapter with the following spec: AC In – 100-240V AC, 50/ 60Hz / DC Out – 12V 1.5AĬonnect the supplied AC adapter to the DC IN Jack on the back of G-BOOM3 and plug the other end into a standard wall outlet to being automatically recharging the built-in battery. NOTES: Disconnect both ends of the AC adapter when not in use. PACKAGE CONTENTS:Ĭonnect the supplied AC adapter (DC 12V 1.5A) to the DC IN Jack on the back of G-BOOM3 and plug the other end into a standard wall outlet (100~240V 50-60Hz). Specications are subject to be updated without notice.

Boom speaker charger